Products
Mounting Material
Hot Mounting(Compression Mounting)
작성자 관리자
날짜 2021-09-29 09:46:34
Hot Mounting(Compression Mounting)
TIn the case of hot mountings, where thermoplastic powder, phenolic powder, and epoxy powder are mainly used, the material is type 1, and curing is carried out using a separate dedicated mounting machine. At this time, hot mounting cannot be applied to samples that are feared to deform the sample because high-temperature and high-pressure conditions must be formed. Depending on the material used, it has various colors and excellent hardness.
| Item | Phenolic | Themoplastic | Epoxy | Diallyl Phthalate | |
|---|---|---|---|---|---|
| Packing unit | 2.5kg / 10kg | 2.5kg / 10kg | 2.5kg / 10kg | 2.5kg / 10kg | |
| Ratio | 20~25g | 15~20g | 20~25g | 20~25g | |
|
Curing Time
(Temp 25℃)
|
90~120sec | 120~240sec | 90~120sec | 90~120sec | |
| Color | Black, Red, Green | Crystal white | Black | Blue | |
| Hardness | HRM 113(Low) | Medium | HRM 105(High) | HRM 103(High) | |
| Molding Temperature | 180~190℃ | 240℃ | 180~200℃ | 220~240℃ | |
| Molding Pressure | 20~25bar | 25~30bar | 20~25bar | 20~25bar | |
| Molding Time | Hitting | 15min | 20min | 15min | 15min |
| Cooling | 15min | 15min | 15min | 15min | |
댓글 (0)
등록된 댓글이 없습니다.