Metallographic Equipment

    Beam Cutting Machine The T - FPCB beam cutting equipment is the equipment for cutting FPCB boards of various thicknesses (0.01 to 1.0T). It has the advantage that various conditions can be set according to the equipment specifications, and the condition setting is simple, it can minimize sample damage compared to the conventional mold cutting method, and does not req...

      Section Point Check Jig It is a very important process to accurately match the points that require observation during the grinding or polishing operation. In the case of fine points where visual observation or low magnification enlargement (such as Lupe) cannot be confirmed, microscopic observation of a certain magnification or higher is essential.  ...

  Auto Head Polisher   Auto Head Polisher is an automatic grinder suitable for grinding and polishing operations. By applying an on/off switch with excellent waterproof function, work operability is simple, and intuitive and fast setting is possible through the speed control knob. It uses materials such as ABS, SUS, and coating aluminum to increase safety and d...

  Auto Head Polisher D/M Auto Head Polisher is an automatic grinder suitable for grinding and polishing operations. In the case of D/M(Double Machine), you can do Fine Polishing and General Grinding and Polishing at the same time using Auto Head. By applying an on/off switch with excellent waterproof function, work operability is simple, and intuitive and fast setting is p...

    Nano Finisher It is an equipment dedicated to Fine Polishing and is suitable for precision Polishing that requires long hours of work. Even if you have general polishing equipment in use, you can add nano Finisher to the existing work step to exclude work deviation due to skill that may occur during manual polishing work or fatigue from long work, and ensure unifor...

  Polisher S/M The Polisher a manual polishing machine suitable for grinding and polishing operations. By applying an on/off switch with excellent waterproof function, work operability is simple, and intuitive and fast setting is possible through the speed control knob. It uses materials such as ABS, SUS, and coating aluminum to increase safety and durability, and...

Polisher D/M   The Polisher D/M is a manual polishing machine suitable for grinding and polishing operations. In the case of Polisher D/M, you can do Fine Polishing and General Grinding and Polishing at the same time. By applying an on/off switch with excellent waterproof function, work operability is simple, and intuitive and fast setting is possible through the s...

Semi Auto polisher Semi Auto Polisher is a manual polishing machine suitable for grinding and polishing operations. Semi Auto Head can adjust the load for each holder and maximize surface polishing efficiency with tilt-up function in the sample holder, and allows workers to work under uniform pressure under desired working conditions without having to hold the sample with their hands...

  Grinding Gauge If the observation point can be clearly recognized with the naked eye during microsection for cross-sectional observation of the sample, it can be checked during the Grinding & Polishing stage. However, if it is difficult to directly identify the sample due to the material, shape, size, or other factors, the desired measurement point can be implemented by ...

  Polisher Sludge Filter It is a device that removes sludge generated during grinding using a sludge filter and discharges filtered water. The drainage of the polisher is connected to the hole at the top of the filter to discharge filtered water through the outlet at the bottom.

  Pressure Chamber   If acrylic and epoxy mounting materials are used, air bubbles (emission gas) may remain even after curing is completed due to an increase in temperature generated during curing. Alternatively, depending on the material or shape of the sample, an environment in which bubbles or gas are generated and cannot escape may occur. In this case, when th...

  Grinding Level Holder Depending on the material of the product, hardness difference, or skill of the operator, uneven wear may occur during grinding, and this part can be removed by using the grinding level holder. The molding sample is fixed to GLH-32 (25) and used for grinding work, and the marking located at the top is an auxiliary device for adjusting the thickness to...